Implementación de OEE y SMED como herramientas de Lean Manufacturing en una empresa del sector plástico.

Fecha
2014-10-06
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ingeniería Industrial. Maestría en Sistemas de Producción y Productividad.
Resumen
En esta tesis de maestría, las herramientas OEE (Overall Equipment Effectiveness) y SMED (Single Minute Exchange of Die) fueron usadas como técnicas de Producción Esbelta o Lean Manufacturing para medir y hacer más eficiente la producción. Se hace un enfoque de cómo se está midiendo la productividad y se propone un método mediante la utilización de un KPI adecuado y útil. La investigación fue llevada a cabo en el área de termoformado de la empresa Plásticos del Litoral S.A. ubicada en la ciudad de Guayaquil. El trabajo se realizó durante los años 2013-2014. La metodología empleada está basada en la investigación descriptiva a través de la toma directa de datos reales de producción Las conclusiones del estudio nos demuestran que el OEE unido al SMED se muestran como técnicas totalmente útiles y aplicables a cualquier máquina. Se demuestra a través de la investigación que el OEE muestra claramente las pérdidas productivas de una máquina, y una vez identificadas, pueden ser eliminadas o reducidas por la aplicación de la técnica SMED con la consiguiente reducción de los costos de producción, a fin de lograr una mayor competitividad.
In this master's thesis, the OEE (Overall Equipment Effectiveness) and SMED (Single Minute Exchange of Die) tools were used as Lean Manufacturing or Lean production techniques to measure and make more efficient the production. An approach is made of how productivity is being measured and a method using a suitable and useful KPI is proposed. The research was carried out in the thermoforming area at Plásticos del Litoral S.A. a company in the city of Guayaquil. The methodology used is based on the descriptive research through direct real production data The findings of the study show us the OEE joined SMED shown as completely useful and techniques applicable to the study of the productivity of any machine. Shown through research that the OEE displays clearly productive losses of a machine, and once identified, they may be eliminated or reduced by the application of the SMED technique with the consequent reduction of production costs, in order to achieve improved competitiveness.
Descripción
Este documento contiene archivo en PDF.
Palabras clave
SISTEMAS DE PRODUCCIÓN Y PRODUCTIVIDAD, PRODUCCIÓN ESBELTA, MANUFACTURA INDUSTRIAL, PLÁSTICOS
Citación