Mejora en el proceso de conversión del papel celulósico a papel sanitario - pañal desechable utilizando la norma de Buenas Prácticas de Manufactura (BPM) de la Empresa CMPC Ecuador.
Archivos
Fecha
2018-03-13
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ingeniería Industrial. Carrera de Ingeniería Industrial.
Resumen
En el desarrollo de este trabajo encontraremos un análisis del problema principal de la Empresa CMPC Ecuador. Debido a que sus estándares de calidad no están documentados, se ve en la necesidad de elaborar un sistema de garantía como son las Buenas Prácticas de Manufactura (BPM).Para el desarrollo del sistema es importante conocer la finalidad y los objetivos claves para el diseño de la documentación de las Buenas prácticas de Manufactura, el propósito primordial es garantizar la calidad del proceso de Conversión ofrece al consumidor y para lograrlo se indicó que es necesario realizar un diagnóstico general de la empresa, un manual de procedimientos (BPM) y una capacitación al personal. Cada uno de estos objetivos se analiza en las etapas indicando la finalidad y la forma en que se desarrollarán. En la parte del diseño se menciona el tipo de investigación descriptiva, pues se realizará diagnósticos y se analizarán los resultados obtenidos. Para abordar cada uno de los capítulos del proyecto primero se debe de hacer una investigación teórica de todos los temas que se necesitan para el diseño del documento, se plasmaron investigaciones similares, a nivel Departamental, Nacional e internacional, también se elaboró un marco teórico donde se aplicaron definiciones sobre el Proceso de Conversión, las Buenas Prácticas de Manufactura, planes de limpieza, la documentación y la capacitación, con esto obtendremos procesos seguros y el incremento de la productividad al tener documentos medibles cuantificables.
In the development of this work we will find an analysis of the main problem of the CMPC Ecuador Company. Because its quality standards are not documented, it is necessary to develop a guarantee system such as Good Manufacturing Practices (GMP). For the development of the system, it is important to know the purpose and the key objectives for the design. of the documentation of Good Manufacturing Practices, the main purpose is to guarantee the quality of the Conversion process offered to the consumer and to achieve this it was indicated that it is necessary to make a general diagnosis of the company, a procedure manual (BPM) and training to the staff. Each of these objectives is analyzed in the stages indicating the purpose and the way in which they will be developed. In the design part, the type of descriptive research is mentioned, since diagnoses will be made and the results obtained will be analyzed. To address each of the project chapters, a theoretical investigation of all the issues needed for the design of the document must first be made, similar investigations were carried out, at the departmental, national and international level, a theoretical framework was also elaborated where definitions were applied on the Conversion Process, Good Manufacturing Practices, cleaning plans, documentation and training, with this we will obtain safe processes and increase productivity by having quantifiable measurable documents.
In the development of this work we will find an analysis of the main problem of the CMPC Ecuador Company. Because its quality standards are not documented, it is necessary to develop a guarantee system such as Good Manufacturing Practices (GMP). For the development of the system, it is important to know the purpose and the key objectives for the design. of the documentation of Good Manufacturing Practices, the main purpose is to guarantee the quality of the Conversion process offered to the consumer and to achieve this it was indicated that it is necessary to make a general diagnosis of the company, a procedure manual (BPM) and training to the staff. Each of these objectives is analyzed in the stages indicating the purpose and the way in which they will be developed. In the design part, the type of descriptive research is mentioned, since diagnoses will be made and the results obtained will be analyzed. To address each of the project chapters, a theoretical investigation of all the issues needed for the design of the document must first be made, similar investigations were carried out, at the departmental, national and international level, a theoretical framework was also elaborated where definitions were applied on the Conversion Process, Good Manufacturing Practices, cleaning plans, documentation and training, with this we will obtain safe processes and increase productivity by having quantifiable measurable documents.
Descripción
Este documento contiene archivo en PDF.
Palabras clave
SISTEMAS INTEGRADOS DE GESTIÓN, PROCESO DE CONVERSIÓN, PAPEL CELULÓSICO A PAPEL SANITARIO, BUENAS PRÁCTICAS DE MANUFACTURA