Adaptación de estándares de gestión energética bajo la Normativa ISO 50001:2011, en Empresas Termoformadoras "Análisis de la eficiencia energética".
Fecha
2017-11-06
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ingeniería Industrial. Carrera de Ingeniería Industrial.
Resumen
Como fruto del esfuerzo de todos estos años de estudios en mi querida facultad de Ingeniería Industrial, realizó esta tesis como evidencia de todo lo aprendido y como requisito para la obtención del título de tercer nivel de Ingeniero Industrial. En la presente tesis analizamos la problemática de la gestión de energía en una empresa del sector de plástico, específicamente empresa de termoformado. En el primer capítulo se identifica la empresa, se establecen los objetivos que impulsan a la tesis, se delimita el problema y se hace referencia al marco teórico en que reposa la presente. En el segundo capítulo, se realiza una identificación de los procesos actuales y se hace un análisis de la normativa de gestión energética a la empresa. En el tercer capítulo se realiza la propuesta de mejoramiento en base a lo evidenciado en el segundo capítulo, mediante la relación Costo vs Beneficio se obtiene un parámetro financiero para la toma de decisión, demostrando que las medidas propuestas son justificadas y sirven para el mejoramiento de la empresa, las cuales se forman en bases para la implementación de un Sistema de Gestión Energética en bases a la ISO 50001:2011.
As a result of the effort of all these years of studies in my beloved Faculty of Industrial Engineering, I made this thesis as an evidence of all that was learned and as a requisite for obtaining the title of third level of Industrial Engineer. In this thesis we analyze the problem of energy management in a company in the plastic sector, specifically thermoforming company. The first chapter identifies the company, establishes the objectives that drive the thesis, delimits the problem and refers to the theoretical framework in which the present lies. In the second chapter, an identification of the current processes is carried out and an analysis of the energy management regulations is made to the company. In the third chapter, the improvement proposal is made on the basis of what is evidenced in the second chapter, through the relation Cost vs Benefit, a financial parameter is obtained for the decision making, demonstrating that the proposed measures are justified and serve for the improvement of the company, which are formed in bases for the implementation of an Energy Management System based on ISO 50001: 2011.
As a result of the effort of all these years of studies in my beloved Faculty of Industrial Engineering, I made this thesis as an evidence of all that was learned and as a requisite for obtaining the title of third level of Industrial Engineer. In this thesis we analyze the problem of energy management in a company in the plastic sector, specifically thermoforming company. The first chapter identifies the company, establishes the objectives that drive the thesis, delimits the problem and refers to the theoretical framework in which the present lies. In the second chapter, an identification of the current processes is carried out and an analysis of the energy management regulations is made to the company. In the third chapter, the improvement proposal is made on the basis of what is evidenced in the second chapter, through the relation Cost vs Benefit, a financial parameter is obtained for the decision making, demonstrating that the proposed measures are justified and serve for the improvement of the company, which are formed in bases for the implementation of an Energy Management System based on ISO 50001: 2011.
Descripción
Este documento contiene archivo en PDF.
Palabras clave
SISTEMAS INTEGRADOS DE GESTIÓN, TERMOFORMADO, GESTIÓN ENERGÉTICA, NORMATIVA ISO 50001