Mejoramiento de la producción en el área de inyección del codo de 1/2* 90º en la Empresa Plastigama.
No hay miniatura disponible
Fecha
2016-08-19
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ingeniería Industrial. Carrera de Ingeniería Industrial.
Resumen
Este proyecto tiene como propósito de optimizar los recursos materiales, humanos y financieros de la planta de P.P Plastigama Plástico, esto debido a que en la planta de Inyección PP existen dos problemas principales como son los pedidos grandes del codo de ½ por 90° para agua potable, por la gran demanda de pedido que no se puede cumplir en tan poco tiempo y el proceso generado en planta son muy deficientes en el cual existen ocasiones que no se completan el stock y el cliente buscara otros proveedores que cumplan con sus necesidades, esto es causado en gran parte a la antigüedad de los moldes y a lo difícil de trabajar con este tipo de materia prima ya que es muy líquida y produce el accesorio con demasiada rebaba. Es por esta razón que se ve la necesidad de reemplazar el molde del codo de 1/2x 90º de 8 cavidades por el de codo de 16 cavidades que beneficia en cubrir la demanda en menos tiempos y optimiza el tiempo del operador ya que con el molde antiguo se tenía que utilizar la mano de obra rebabeando cada accesorio con el propuesto codo se ganaría tiempo y mayor producción utilizando los material PP es más fácil de trabajar debido a algunos químicos y resinas y acelerantés que hacen más rápido el enfriado de producto y mayor elasticidad sin dañarse el accesorio
The purpose of this project is to optimize the financial, material and human resources of the PP Plastigama Plastics plant, since there are two major problems in the PP plant which are the big orders of pipe elbows of ½ by 90° for the city water due to the great demand of orders that cannot be fulfill in such a short period of time and also because the process generated at the factory is so deficient that in some occasions the stock is not completed leading the customer to look for other suppliers that will fulfill their needs. This is caused in great part because of the antiqueness of the molds and also because it is so difficult to work with raw material as it is liquid and the accessory deburres so much. That is why the strong need of replacing the pipe elbow mold of ½ by 90°of 8 cavities for another one of 16 cavities that benefits in covering the demand in less time as well as it will optimize the time of the operator since he had to use more hours of labour deburring each accessory with the old mold. With this proposed elbow could be proficient in time and increase production with the elbows prior mentioned, which have a PP material, and therefore they will be much easier to work with, since they have better chemicals, gums and accelerators which speed up the process of cooling of the product giving it more elasticity without damaging the accessory.
The purpose of this project is to optimize the financial, material and human resources of the PP Plastigama Plastics plant, since there are two major problems in the PP plant which are the big orders of pipe elbows of ½ by 90° for the city water due to the great demand of orders that cannot be fulfill in such a short period of time and also because the process generated at the factory is so deficient that in some occasions the stock is not completed leading the customer to look for other suppliers that will fulfill their needs. This is caused in great part because of the antiqueness of the molds and also because it is so difficult to work with raw material as it is liquid and the accessory deburres so much. That is why the strong need of replacing the pipe elbow mold of ½ by 90°of 8 cavities for another one of 16 cavities that benefits in covering the demand in less time as well as it will optimize the time of the operator since he had to use more hours of labour deburring each accessory with the old mold. With this proposed elbow could be proficient in time and increase production with the elbows prior mentioned, which have a PP material, and therefore they will be much easier to work with, since they have better chemicals, gums and accelerators which speed up the process of cooling of the product giving it more elasticity without damaging the accessory.
Descripción
Este documento contiene archivo en PDF.
Palabras clave
SISTEMAS PRODUCTIVOS, MEJORAMIENTO DE PRODUCCIÓN, PLANTA DE INYECCIÓN PP, POLIPROPILENO