Influencia en la colocación de aisladores sísmicos en el comportamiento estructural de un edificio de cinco plantas.

Fecha
2018-01
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ciencias Matemáticas y Físicas. Carrera de Ingeniería Civil.
Resumen
El presente trabajo de investigación, tiene como objetivo realizar un análisis comparativo de resultados en el comportamiento de un edificio con el sistema de aislación sísmica vs un edificio de base fija, en el cual hemos usado el tipo aislador de base HDRB (High-Damping Rubber Bearing). Basado en la idea de reducir la demanda sísmica en vez de aumentar la capacidad de resistencia de la estructura, el aislamiento sísmico es un método simple de reducir los daños que producen los terremotos hacia la estructura. El diseño del aislador sísmico fue realizado con las normas chilenas NCH 2745 y NCH 433 y ejecutado con el programa de diseño y análisis estructural ETAB’s, ofreciéndonos un ejemplo del comportamiento de los elemento que conforma la estructura durante un sismo, los diseños de cada elemento estructural fue corroborado con ayuda de la Norma Ecuatoriana de la Construcción (NEC-15) y American Concrete Institute (ACI 318-14), Finalmente se realiza un análisis comparativo de los resultados obtenidos por el programa ETAB’s entre la edificación con el sistema de aislamiento sísmico y la edificación de base fija.
The present research work, has as purpose to perform a comparative analysis of results between the behavior of a building with the seismic insulation system and on the other hand a fixed base building in which we have the type of base insulator HDRB ( High-Damping Rubber Bearing). Based on the idea of reducing seismic demand rather than increasing the resilience of the structure, the seismic isolation is a simple method of reducing the damage that earthquakes cause to the structure. The design of the seismic isolator was carried out under Chilean Norms NCH 2745 y NCH 433 and executed with the modeling program ETAB’s, obtaining a clear example of the behavior of each element that forms the structure during an earthquake. The designs of each structural element were corroborated with the help of the entity Ecuadorian Construction Standard (NEC -15) and American Concrete Institute (ACI 318- 14). Finally, we compared and evaluated the advantages and benefits that the structure would obtain with the seismic isolation vs the conventional built structure, guaranteeing to reduce damages caused by earthquakes and loss of human lives.
Descripción
Abode PDF
Palabras clave
ANALISIS COMPARATIVO, SISTEMAS DE AISLACIÓN SISMICO, NEC-15/AISLADOR TIPO HDRB, CORTE BASAL, VULNERABILIDAD SÍSMICA.
Citación