Estudio para la remediación de los asentamientos diferenciales del tanque t85-110 n, ubicado en la coop. Juan Montalvo, abastecedor de a App en el sector el Fortín
No hay miniatura disponible
Fecha
2019-04
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ciencias Matemáticas y Físicas. Carrera de Ingeniería Civil
Resumen
En el presente trabajo se realizó una investigación para la remediación de los asentamientos diferenciales que sucedieron en una estructura.
Inicialmente se realizaron los estudios de suelo requeridos para determinar los daños causados, la estructura tenía un asentamiento de aproximadamente 20 mm de un lado, lo que ocasionaba que la estructura tuviese una deformación, la cual con el tiempo iría incrementando. La remediación presentada para los asentamientos diferenciales en este trabajo se consideró columnas de Jet Grouting. En el presente trabajo se realizó un diseño completo para la aplicación de dicha remediación, se utilizaron programas como plaxis 3D y SAP2000 para modelar las columnas de Jet Grouting y obtener los resultados más cercanos a la realidad de su comportamiento. Los resultados fueron muy buenos, y se aspira que la estructura regrese a su estado original.
In the present work an investigation was made for the remediation of the differential settlements that happened in a structure. Initially the soil studies required to determine the damage caused were carried out, the structure had a settlement of approximately 20 mm on one side, which caused the structure to have a deformation, which over time would increase. The remediation presented for differential settlements in this work was considered Jet Grouting columns. In the present work a complete design was made for the application of said remediation, programs like 3D plaxis and SAP2000 were used to model the Jet Grouting columns and obtain the results closest to the reality of their behavior. The results were very good, and the structure is expected to return to its original state.
In the present work an investigation was made for the remediation of the differential settlements that happened in a structure. Initially the soil studies required to determine the damage caused were carried out, the structure had a settlement of approximately 20 mm on one side, which caused the structure to have a deformation, which over time would increase. The remediation presented for differential settlements in this work was considered Jet Grouting columns. In the present work a complete design was made for the application of said remediation, programs like 3D plaxis and SAP2000 were used to model the Jet Grouting columns and obtain the results closest to the reality of their behavior. The results were very good, and the structure is expected to return to its original state.
Descripción
PDF
Palabras clave
Asentamientos Diferenciales, Remediación, Estudio, Diseño, Jet Grouting