Análisis del comportamiento de una pila tipo con aislador y sin aislador Sísmico, aplicado para un puente ubicado en la ciudad de Guayaquil, provincia del Guayas, mediante el uso asistido de software de análisis estructural.

No hay miniatura disponible
Fecha
2020-10
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil - Facultad de Ciencias Matemáticas y Físicas Carrera de Ingeniería Civil
Resumen
En este trabajo el propósito general es realizar un análisis comparativo de la respuesta sísmica de una pila tipo de un puente viga-losa con diseño convencional y otro utilizando aisladores sísmicos en los apoyos de las vigas, ubicado en la ciudad de Guayaquil. La superestructura se compone de vigas metálicas tipo matiere simplemente apoyado sobre estribos y pilares, la sub estructura tiene una configuración de pórtico de concreto armado, conformado por dos columnas circulares unidas en la parte superior por una viga cabezal y en la parte inferior por una zapata. Sé realizará la comparación de la respuesta sísmica de la pila con y sin aislador sísmico, con el diseño preliminar de la superestructura y subestructura, siguiendo los lineamientos de la AASHTO LRFD 2017. Para el análisis sísmico también se usará la normativa actual vigente en el Ecuador NEC-SE-DS-2015.Para el análisis estructural del puente propuesto, se empleará el software de análisis estructural SAP2000 v21.1.1 ultímate. Posteriormente como parte de los resultados finales se realizará un cuadro comparativo en donde se denoten las diferencias del desempeño, comportamiento y fuerzas generadas en una estructura aislada y una no aislada sísmicamente.
In this work the general purpose is to perform a comparative analysis of the seismic response of a typical pier of a beam-slab bridge with a conventional design and another using seismic insulators in the beam supports, located in the city of Guayaquil. The superstructure is made up of metallic metal beams type matiere simply supported on stirrups and pillars, the sub-structure has a reinforced concrete portico configuration, made up of two circular columns joined at the top by a head beam and at the bottom by a shoe. It will be carried out the comparison of the seissmic response of the pile with and without seismic isolator, with the preliminary design of the superstructure and substructure, following the guidelines of the AASHTO LRFD 2017. For the seismic analysis the current regulations in force in Ecuador will also be used NEC-SE-DS-2015. For the structural analysis of the proposed bridge, the structural analysis software SAP2000 v21.1.1 finalize will be used. Subsequently, as part of the final results, a comparative table will be made where the differences in performance, behavior and forces generated in an isolated structure and one not seismically isolated are denoted.
Descripción
pdf
Palabras clave
Análisis, Comparativo, Subestructura, Superestructura, Aisladores, Desplazamientos, Sismica
Citación