Desarrollo de un prototipo para la predicción de lluvias por medio de un pluviómetro con sistema de pesaje.
Fecha
2021-03
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ciencias Matemáticas y Físicas. Carrera de Ingeniería en Sistemas Computacionales.
Resumen
El presente trabajo de titulación se basa en el desarrollo de un pluviómetro con sistema
de pesaje, haciendo uso de componentes de hardware libre para la recolección de
información de la precipitación de lluvia, humedad y temperatura, para presentarla en una
página web con PHP que recibe los datos de los sensores del pluviómetro. Para la
elaboración del prototipo con el sistema de pesaje es necesario obtener el sensor HX711
y una celda de carga de 5Kg que ayudará a pesar la precipitación de lluvia, junto a los
sensores de temperatura y humedad, estos datos climatológicos serán enviados a través
de la tecnología IoT usando el módulo de wifi ESP 32. El proceso de desarrollo se basa
en la metodología descriptiva para realizar las técnicas como encuesta obteniendo los
requerimientos de la comunidad, procesando dichos datos con el modelo estadístico Spss
para las encuestas. Gracias a los sistemas por pesaje se obtiene mayor precisión al
momento de la recolección de los datos de la precipitación de lluvia, que serán
visualizados en la página web con gráficos estadísticos para una mejor interpretación al
usuario. La comparación de los datos con el sistema por goteo y sistema por pesaje, se lo puede observar en los gráficos presentados en la página web.
This degree work is based on the development of a rain gauge with a weighing system, making use of free hardware components to collect information on rainfall, humidity and temperature, to present it on a web page with PHP that receives the data from the rain gauge sensors. For the development of the prototype with the weighing system, it is necessary to obtain the HX711 sensor and a 5Kg load cell that will help to weigh the rainfall, together with the temperature and humidity sensors, these climatological data will be sent through the IoT technology using the ESP 32 wifi module. The development process is based on the descriptive methodology to carry out the techniques such as a survey, obtaining the requirements of the community, processing said data with the SPSS statistical model for the surveys. Thanks to weighing systems, greater precision is obtained when collecting rain precipitation data, which will be displayed on the web page with statistical graphics for a better interpretation by the user. The comparison of the data with the drip system and the weighing system can be seen in the graphs presented on the website.
This degree work is based on the development of a rain gauge with a weighing system, making use of free hardware components to collect information on rainfall, humidity and temperature, to present it on a web page with PHP that receives the data from the rain gauge sensors. For the development of the prototype with the weighing system, it is necessary to obtain the HX711 sensor and a 5Kg load cell that will help to weigh the rainfall, together with the temperature and humidity sensors, these climatological data will be sent through the IoT technology using the ESP 32 wifi module. The development process is based on the descriptive methodology to carry out the techniques such as a survey, obtaining the requirements of the community, processing said data with the SPSS statistical model for the surveys. Thanks to weighing systems, greater precision is obtained when collecting rain precipitation data, which will be displayed on the web page with statistical graphics for a better interpretation by the user. The comparison of the data with the drip system and the weighing system can be seen in the graphs presented on the website.
Descripción
PDF
Palabras clave
Pluviómetro, Prototipo, IoT, Datos climatologicos, Página Web, Spss, Rain Guage, Prototype, IoT, Climatological Data, Web Pages,, SPSS