“Desarrollo de un banco de pruebas para la medición de polarización y propagación mediante radio definido por software”
Fecha
2023
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ciencias Matemáticas y Físicas. Carrera de Ingeniería en Networking y Telecomunicaciones
Resumen
El desarrollo del proyecto diseña un banco de pruebas cuyo fin es permitir la medición de la propagación y polarización de una antena, esto a través de un dispositivo espectral denominado SDR (Software Defined Radio) ADALM-PLUTO que permitirá captar y recibir señales emitidas a través de antenas conectadas. al dispositivo que a su vez podremos observar los resultados obtenidos a través del programa Python, en este proyecto se enfocara en medir la propagación de la señal como el rango de ondas de radiofrecuencia y sus componentes, el desarrollo del banco obtendría buenas aceptación Debido a que es factible su implementación en las universidades del país y a su vez en los laboratorios de telecomunicaciones, con el objetivo de poder ayudar a resolver los problemas de aprendizaje en los estudiantes de ingeniería en telecomunicaciones respecto al estudio de la medición de prueba con antenas por lo cual falta de equipamiento debido a sus altos costos .
The development of the project designs a test bench whose purpose is to allow the measurement of propagation and polarization of an antenna, this through a spectral device called SDR (Software Defined Radio) ADALM-PLUTO that will allow capturing and receiving signals emitted through antennas connected to the device that in turn we will be able to observe the results obtained through the Python program, in this project we will focus on measuring signal propagation such as the range of radio frequency waves and their components, the development of the bank would obtain good acceptance Because its implementation is feasible in the country's universities and in turn in telecommunication laboratories, with the aim of being able to help solve learning problems in telecommunication engineering students regarding the study of test measurement with antennas by which Lack of equipment due to its high costs.
The development of the project designs a test bench whose purpose is to allow the measurement of propagation and polarization of an antenna, this through a spectral device called SDR (Software Defined Radio) ADALM-PLUTO that will allow capturing and receiving signals emitted through antennas connected to the device that in turn we will be able to observe the results obtained through the Python program, in this project we will focus on measuring signal propagation such as the range of radio frequency waves and their components, the development of the bank would obtain good acceptance Because its implementation is feasible in the country's universities and in turn in telecommunication laboratories, with the aim of being able to help solve learning problems in telecommunication engineering students regarding the study of test measurement with antennas by which Lack of equipment due to its high costs.
Descripción
PDF
Palabras clave
RF, Banco de pruebas, Potencia, SDR, Patrón de radiación