Diseño de un componente con tecnologías de información y comunicación para la automatización de los parámetros que controlan la producción de tilapia. proyecto FCI 009-2021 de la Universidad de Guayaquil.
Fecha
2023-03
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ciencias Matemáticas y Físicas. Carrera de Ingeniería en Sistemas Computacionales.
Resumen
En la industria pesquera del Ecuador, se realiza un proceso para el desarrollo de las tilapias, este proceso en la mayor parte se lleva de manera manual, la piscicultura “cacera” se realiza de una manera donde la tilapia pueda adquirir las proteínas y tamaño necesario para diferenciarse en el mercado, pero esto conlleva a muchos fallos en el cultivo. Lo que se propone es involucrar el desarrollo con IOT en los estanques, esto quiere decir que las tilapias tendrán su alimentación programada, el oxígeno y pH adecuado, y si necesita alguna u otra proteína. El hardware es un dispositivo creado o elaborado y programado en este caso utilizando la placa Arduino y un/os modulo para que pueda traducir la información de tarjetas el cual se encargará de recolectar toda la información de dichas tarjetas, registrarla al sistema para el Software se encargue de administrar las tareas programadas como alimentación, limpieza, entre otros. Mediante un dispositivo y almacenando en la web.
In the fishing industry of Ecuador, a process is carried out for the development of tilapia, this process is mostly carried out manually, the “hunting” fish farming is carried out in a way where the tilapia can acquire the necessary proteins and size to differentiate itself in the market, but this leads to many failures in cultivation. What is proposed is to involve the development with IOT in the ponds, this means that the tilapias will have their programmed feeding, the adequate oxygen and pH, and if they need any protein or another. The hardware is a device created or elaborated and programmed in this case using the Arduino board and a module so that it can translate the card information which will be in charge of collecting all the information of said cards, registering it to the system for the Software to be in charge of managing scheduled tasks such as feeding, cleaning, among others. Using a device and storing on the web.
In the fishing industry of Ecuador, a process is carried out for the development of tilapia, this process is mostly carried out manually, the “hunting” fish farming is carried out in a way where the tilapia can acquire the necessary proteins and size to differentiate itself in the market, but this leads to many failures in cultivation. What is proposed is to involve the development with IOT in the ponds, this means that the tilapias will have their programmed feeding, the adequate oxygen and pH, and if they need any protein or another. The hardware is a device created or elaborated and programmed in this case using the Arduino board and a module so that it can translate the card information which will be in charge of collecting all the information of said cards, registering it to the system for the Software to be in charge of managing scheduled tasks such as feeding, cleaning, among others. Using a device and storing on the web.
Descripción
PDF
Palabras clave
SOFTWARE, HARDWARE, IOT, ARDUINO, WEB