Programa de prevención de riesgos en el complejo siderúrgico Andec - Funasa.
No hay miniatura disponible
Archivos
Fecha
2005-06-03
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de Guayaquil. Facultad de Ingeniería Industrial. Carrera de Ingeniería Industrial.
Resumen
La importancia de este trabajo aporta con conocimientos teóricos- prácticos que ayudan a resolver la problemática que existe por causa de los factores de riesgo en la salud de los trabajadores, quienes se constituyen en el activo más importante de la Empresa; es por eso que se establecerá un Programa de Prevención de Riesgos, aplicando la metodología del Reconocimiento, Evaluación y Control. ANDEC inició sus labores en el año de 1969, en la ciudad de Guayaquil, en el Sector del Guasmo Sur Av. Raúl Clemente Huerta fabricando varillas de acero para la construcción que van desde 4,5 mm. Hasta 42 mm. de diámetro en longitudes normales de 6,9 y 12 metros. Además ofrece productos como mallas electro soldadas, barras cuadradas, platinas y ángulos. ANDEC integró a su proceso a su filial FUNASA que es una acería eléctrica que produce acero en palanquilla la cual entrega directamente a ANDEC palanquillas de acero de 130 x 190 mm. De sección por longitudes de 4 metros. En ANDEC – FUNASA existen problemas por causa de factores de riesgo los más importantes son: Factor Físico, Factor Químico, Factor Ergonómico y Factor Mecánico. Se propone establecer Normas, Reglas y Procedimientos para solucionar la problemática, aplicando un método de prevención laboral que permita jerarquizar el riesgo y las actividades que se deberán desarrollar en el programa de prevención dando soluciones precisas actuando antes de que ocurra el daño físico al trabajador. La propuesta de capacitación ayudará al Complejo Siderúrgico ANDEC – FUNASA a mentalizar a cada trabajador en lo que respecta a la prevención de accidentes, los mismos que ocurren por que no se cumplen las normas y procedimientos de seguridad. La aplicación del programa de prevención de riesgo implica cumplir con normas y procedimientos que ayudará al Complejo ANDEC – FUNASA a través del Departamento de Seguridad Industrial a controlar las zonas de alto riesgo, condiciones y actos inseguros.
The importance of this work provides theoretical-practical knowledge to help solve the problems that exist because of the risk factors in the health of the workers, who constitute the most important asset of the Company; is why it will establish a Risk Prevention Program, applying the methodology of Recognition, Evaluation and Control. ANDEC began its work in 1969, in the city of Guayaquil, in Sector South Guasmo Av. Raul Clemente Huerta manufacturing steel rods for construction ranging from 4.5 mm. Up to 42 mm. normal diameter in lengths from 6.9 to 12 meters. It also offers products such as electro welded mesh, square bars, plates and angles. ANDEC joined his process FUNASA subsidiary is a mini-mill that produces steel billets which delivers directly to ANDEC steel billets of 130 x 190 mm. Section for lengths of 4 meters. In ANDEC - FUNASA problems exist because of the most important factors of risk are: Factor Physical, Chemical Factor Factor Factor Ergonomic and Mechanical. It is proposed to establish standards, rules and procedures to solve the problems using a method of prevention work that allows prioritizing the risk and the activities to be developed in the prevention program giving accurate solutions acting before the physical injury to the worker occurs. The proposed training will help to ANDEC Steel Complex - mentalizar FUNASA to each worker in relation to the prevention of accidents, the same occurring for rules and safety procedures are not followed. The application of risk prevention program involves meeting standards and procedures that will help the complex ANDEC - FUNASA through the Safety Department to monitor high-risk areas, conditions and unsafe acts.
The importance of this work provides theoretical-practical knowledge to help solve the problems that exist because of the risk factors in the health of the workers, who constitute the most important asset of the Company; is why it will establish a Risk Prevention Program, applying the methodology of Recognition, Evaluation and Control. ANDEC began its work in 1969, in the city of Guayaquil, in Sector South Guasmo Av. Raul Clemente Huerta manufacturing steel rods for construction ranging from 4.5 mm. Up to 42 mm. normal diameter in lengths from 6.9 to 12 meters. It also offers products such as electro welded mesh, square bars, plates and angles. ANDEC joined his process FUNASA subsidiary is a mini-mill that produces steel billets which delivers directly to ANDEC steel billets of 130 x 190 mm. Section for lengths of 4 meters. In ANDEC - FUNASA problems exist because of the most important factors of risk are: Factor Physical, Chemical Factor Factor Factor Ergonomic and Mechanical. It is proposed to establish standards, rules and procedures to solve the problems using a method of prevention work that allows prioritizing the risk and the activities to be developed in the prevention program giving accurate solutions acting before the physical injury to the worker occurs. The proposed training will help to ANDEC Steel Complex - mentalizar FUNASA to each worker in relation to the prevention of accidents, the same occurring for rules and safety procedures are not followed. The application of risk prevention program involves meeting standards and procedures that will help the complex ANDEC - FUNASA through the Safety Department to monitor high-risk areas, conditions and unsafe acts.
Descripción
Este documento contiene archivo en PDF.
Palabras clave
SEGURIDAD INDUSTRIAL E IMPACTO AMBIENTAL, FACTORES DE RIESGOS, RIESGOS FÍSICOS, ACEROS